Sheet metal fabrication · Faridabad

Send the drawing. Quote back inside 24 hours.

Laser cutting, CNC bending, welding and powder coating under one roof in Sector 24. Every machine, envelope, material range and tolerance we hold is published below — so you can decide whether we fit your part before you spend a phone call on it.

sq ft under roof
38,000
people on shift
64
day typical lead time
5–9
operating since
2004
1 / 5

What we can hold

If your part sits outside these numbers, we will say so and point you at a shop that can do it. That is cheaper for both of us than finding out at first article.

Equipment
2 × 4kW fibre laser (Trumpf-class), 1 × 3kW CO₂
Working envelope
3000 × 1500 mm bed
Materials & thickness
MS up to 20 mm · SS up to 12 mm · Aluminium up to 8 mm
Tolerance
± 0.1 mm
Capacity
~18,000 running metres / month
Lead time
Typically 5–9 working days from approved drawing

Who we make for

Automotive tier 2

Brackets, enclosures, guards and jigs for OEM suppliers across the Delhi NCR belt.

Electrical panels

Sheet metal enclosures to IP54/IP65, powder coated, with cut-outs to your GA drawing.

Material handling

Trolleys, racks, bins and conveyor frames. Prototype through to repeat batch.

Architectural

Façade panels, railings and perforated screens, finished to RAL shade on request.

Twenty seconds on the shop floor

Laser, press brake, finished parts on a pallet, a drawing with calipers on it. The whole capability, without a site visit.

Demo clip · 9:16 · made for the feed

How a job runs

  1. Send the drawing

    DXF, STEP, PDF or a dimensioned sketch on paper. We will tell you within a day if something is not manufacturable as drawn.

  2. Quote in 24 hours

    Itemised — material, cutting, bending, welding, finishing. No single lump figure you cannot interrogate.

  3. First-article approval

    One piece made and measured before the batch runs. Report goes to you with the dimensions on it.

  4. Batch and dispatch

    Packed to your spec, dispatched from Faridabad. Transport arranged across NCR or to your freight partner.

ISO 9001:2015

Quality management · certified since 2017

MSME Udyam

UDYAM-HR-XX-00XXXXX

GST registered

06XXXXXXXXXXXZX

In-house QC

CMM, height gauge, coating thickness meter, salt spray

Request a quote

Attach a DXF, STEP or PDF and we will come back within one working day with an itemised price and a lead time. A dimensioned hand sketch is fine too — most of our repeat work started as one.

  • Itemised quote, not a lump sum
  • First-article report before the batch
  • NDA on request, signed same day

Plot 14, Industrial Area, Sector 24, Faridabad 121005
0129-4XXXXXX · rfq@shaktisteel.example

Demo form — it does not send anything.

Call plantGet a quote
Demo website

Shakti Steel & Fabrication is not a real business. Built by Nacovate to show design and functionality.